Rustins – Outdoor Woodstain – various colours – 250ml & 500ml

#!trpst#trp-gettext data-trpgettextoriginal=252#!trpen#13,95 23,00 #!trpst#/trp-gettext#!trpen#

Rustins – Outdoor Woodstain – various colours.
Rustins Exterior  & Interior Wood Stain product is quick drying, very durable.
Gives long lasting protection to all external and internal wood projects.

#!trpst#trp-gettext data-trpgettextoriginal=276#!trpen#UGS :#!trpst#/trp-gettext#!trpen# #!trpst#trp-gettext data-trpgettextoriginal=273#!trpen#ND#!trpst#/trp-gettext#!trpen# #!trpst#trp-gettext data-trpgettextoriginal=121#!trpen#Catégorie :#!trpst#/trp-gettext#!trpen# #!trpst#trp-gettext data-trpgettextoriginal=4922#!trpen#Marque : #!trpst#/trp-gettext#!trpen#

Rustins – Outdoor Woodstain – various colours – 250ml & 500ml.

Rustins Outdoor Woodstain is water based, quick drying and very durable.

Gives long lasting protection to all external and internal wood projects, and is touch dry in 30 minutes, re-coatable in 4 hours.

Available in 7 attractive wood shades.

This coloured, water-based woodstain is available in a satin finish.
It gives long lasting protection to all external and internal wood, allowing the natural grain to show through.

Intended Use:

Exterior and interior joinery –  both hard & softwood, doors, windows, garden furniture, conservatories.

Special Features:

Low odour, resists cracking, peeling, blistering.
Wash brushes in water.
Available in Light, Medium and Dark Oak, Mahogany, Teak, Walnut and Ebony.

Preparation:

Surfaces must be clean, dry and free of wax, grease and contaminants, smooth and sound.
Fill large cracks, open joints and damaged areas with a high quality flexible filler.
Wash oily woods, knots or resinous areas with white spirit.
Remove mould, lichens, algae & moss with a brush, scraper & domestic bleach, then rinse thoroughly and allow to dry. Rustins Woodstain can be to applied to bare wood.

Application:

Using a synthetic brush, apply liberally with a full brush finishing with the grain.
The first coat may be diluted with water on hot days (up to 15%).
Do not apply to hot surfaces or in strong sunlight if possible or if rain is likely.
Apply up to 3 coats if necessary.

Drying Time – Touch dry  in 30 minutes.
(On hot days may be touch dry within 10 minutes).
Re-coating Time  – 4 hours minimum, depending on temperature & humidity.
Application Temp. Ideally 15-25°C.
Do not apply below 10°C, or in high humidity or if rain expected.
Coverage  – 12-15 sq. metres per litre per coat, depending on absorbency of surface.
Maintenance:
Re-coat every 2 to 3 years. Clean with a mild detergent solution and lightly sand to provide key.
Compatibility:
May be applied over old existing coating if these are in good condition and rubbed down to provide a key.
Coatings not in good condition should be removed with Rustins Strypit Paint andVarnish Stripper.
Settlement:
STIR WELL BEFORE USE.
May dry glossy if not adequately stirred.
Shelf-life/Storage:
Many years if stored in original, tightly closed container in normal conditions.
PROTECT FROM FROST.

 

 

 

 

#!trpst#trp-gettext data-trpgettextoriginal=127#!trpen#Poids#!trpst#/trp-gettext#!trpen# 0,7 #!trpst#trp-gettext data-trpgettextoriginal=4816#!trpen#kg#!trpst#/trp-gettext#!trpen#
Colours

Dark Oak, Ebony, Light Oak, Mahogany, Medium Oak, Teak, Walnut

Size

1L, 250ml, 500ml

fr_FRFrench