Crown Trade – Matt Vinyl – 2.5L – White.
A premium quality matt emulsion for use on interior walls and ceilings, where a flat non-reflective finish is required.
For interior use only.
Do not apply when air or substrate temperatures are likely to fall below 8ºC or when the relative humidity is above 80% during application or the drying period.
PREPARATION:
New Surfaces
All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied.
Porous surfaces should be coated with a ‘mist’ coat of Crown Trade Matt Vinyl diluted with 40% clean water by volume.
All surfaces must be sound, clean, suitably dry and free from anything that will interfere with the adhesion of the materials to be applied e.g. dirt, grease etc.
Remove all loose, failing or suspect paint. Feather edges of sound paint.
Fill any fixing holes, cracks and shallow surface defects with a filler.
Patch prime bare, filled and powdery areas as for new surfaces above.
Wash remaining sound paint with hot water and liquid detergent solution to remove any contaminants, frequently changing
the water.
Any glossy or eggshell surfaces should be wet abraded to provide a key.
Rinse with clean water to remove all residues.
Allow to dry.
COATING SYSTEM:
Apply two coats.
Certain colours may require additional coats to give complete
obliteration.
APPLICATION:
Stir well before and during use.
Apply using good quality tools – synthetic brush or medium pile roller.
For airless spray dilution may be required.
For further information follow the spray manufacturer’s guidelines.
CLEANING:
Return surplus material to container.
Wash tools & equipment with clean water or a warm soapy solution immediately after use.
STORAGE:
Store upright and secure. Store in secure dry conditions inaccessible to children or
animals. Containers should be kept closed during storage.
Do not store below 5ºC or above 40ºC.
French 
English