Rustins – Matt Black – 250ml – 500ml – 1L – 2.5L
A dense black matt paint based on water borne self cross-linking acrylic resin.
For all interior and exterior bare, hardboard, MDF, plaster, brickwork, cement and wrought iron.
Can be used over existing wood and metal primers and over existing paints.
Special Features:
Quick drying.
Excellent covering power.
Clean brushes with water.
Contains special matting agents so that paint dries with a Matt finish.
Preparation:
Surfaces to be coated must be clean, dry and free from wax, grease and contaminants.
Fill holes and cracks with a filler.
Over existing paint, the surface must be cleaned and lightly sanded to provide a key before application.
Application:
Stir before use.
Apply liberally and evenly with synthetic fibre brush or roller.
Coats 1 or 2 coats depending on requirements.
Drying Time:
Touch dry within 30 minutes, depending upon temperature and humidity.
Re-coating Time 2 hours minimum, depending upon temperature and humidity.
Application Temp.
Ideally 15-25°C.
Do not use below 10°C, or in conditions of high humidity.
Coverage:
Approximately 12-14 Sq. mt. per litre, 1 coat, depending on the absorbency of the surface.
Maintenance:
Clean painted surfaces with a mild detergent solution.
Compatibility:
May be applied over solvent and acrylic paint.
Settlement:
STIR WELL BEFORE USE.
Ensure any sediment is thoroughly mixed in.
Shelf-life/Storage:
Many years if stored in original tightly closed container in normal conditions.
Do not store below 5°C. Protect from frost.
Clean-Up:
Clean brushes and hands immediately after use with water.
We are available via WhatsApp – click here:
French 
English