Rustins – Outdoor Woodstain – various colours – 250ml & 500ml

13,95 23,00 

Rustins – Outdoor Woodstain – various colours.
Rustins Exterior  & Interior Wood Stain product is quick drying, very durable.
Gives long lasting protection to all external and internal wood projects.

UGS : ND Catégorie : Marque :

Rustins – Outdoor Woodstain – various colours – 250ml & 500ml.

Rustins Outdoor Woodstain is water based, quick drying and very durable.

Gives long lasting protection to all external and internal wood projects, and is touch dry in 30 minutes, re-coatable in 4 hours.

Available in 7 attractive wood shades.

This coloured, water-based woodstain is available in a satin finish.
It gives long lasting protection to all external and internal wood, allowing the natural grain to show through.

Intended Use:

Exterior and interior joinery –  both hard & softwood, doors, windows, garden furniture, conservatories.

Special Features:

Low odour, resists cracking, peeling, blistering.
Wash brushes in water.
Available in Light, Medium and Dark Oak, Mahogany, Teak, Walnut and Ebony.

Preparation:

Surfaces must be clean, dry and free of wax, grease and contaminants, smooth and sound.
Fill large cracks, open joints and damaged areas with a high quality flexible filler.
Wash oily woods, knots or resinous areas with white spirit.
Remove mould, lichens, algae & moss with a brush, scraper & domestic bleach, then rinse thoroughly and allow to dry. Rustins Woodstain can be to applied to bare wood.

Application:

Using a synthetic brush, apply liberally with a full brush finishing with the grain.
The first coat may be diluted with water on hot days (up to 15%).
Do not apply to hot surfaces or in strong sunlight if possible or if rain is likely.
Apply up to 3 coats if necessary.

Drying Time – Touch dry  in 30 minutes.
(On hot days may be touch dry within 10 minutes).
Re-coating Time  – 4 hours minimum, depending on temperature & humidity.
Application Temp. Ideally 15-25°C.
Do not apply below 10°C, or in high humidity or if rain expected.
Coverage  – 12-15 sq. metres per litre per coat, depending on absorbency of surface.
Maintenance:
Re-coat every 2 to 3 years. Clean with a mild detergent solution and lightly sand to provide key.
Compatibility:
May be applied over old existing coating if these are in good condition and rubbed down to provide a key.
Coatings not in good condition should be removed with Rustins Strypit Paint andVarnish Stripper.
Settlement:
STIR WELL BEFORE USE.
May dry glossy if not adequately stirred.
Shelf-life/Storage:
Many years if stored in original, tightly closed container in normal conditions.
PROTECT FROM FROST.

 

 

 

 

Poids 0,7 kg
Colours

Dark Oak, Ebony, Light Oak, Mahogany, Medium Oak, Teak, Walnut

Size

1L, 250ml, 500ml

fr_FRFrench