Our Pearly Queen is shimmering London royalty commanding a pearly presence. Silvery-pearl toned, shimmering lustre, you will want to use everywhere!
Fun and simple to use for stunning effects – highlighting detail, edging, handles, mouldings and more.
Add glamour with stencils or masking tape and let your creativity take over!
Eco-friendly, water-based and with minimal VOC content, suitable for interior or exterior use on a wide range of hard surfaces including wood furniture, laminate, metal, concrete, glass and leather.
Combine with Finishing Coat or TTC to make a glaze for shimmering or pearly top coats!
Coverage
100ml will provide a single coat of up to 1m2. Additional coats may be required for a heavier effect
Preparation
Ensure surfaces are in suitable condition for painting – clean, dry, free from grease or penetrating substances and in sound condition. If previously painted, remove loose or flaking paint
Surface preparation required in addition to the above – clean with Sugar Soap, rinse, dry thoroughly.
Application and drying
Stir before each use
Apply with a good quality brush
Allow minimum of 1 hour between coats
Provide adequate ventilation when using.
Reseal pot after use. Clean up any spills immediately with water. Wash brushes in warm, soapy water
Do not store where the container could be subjected to damp, frost, freezing or high temperatures
Dispose of contents in accordance with local and national legislation
