Rustins – ASAP – various colours

Description

ASAP – various colours.

A water-based, multi-surface paint that dries to a satin finish.

Quick drying and easy to apply to on an extensive range of surfaces both indoors and outdoors.

It resists flaking or peeling because of its flexible capabilities.

It is touch dry in 30 minutes and re-coating time is approximately 2-3 hours.

For use on a wide range of surfaces such as UPVC, most plastics, timber, metal, tiles, stone and
bricks without the need of a primer.

Preparation:
The surface must be clean and free from dust and any loose paint, wax, grease, dirt, fungal growth or solid matter likely to interfere with the adhesion of the paint.
Do not apply to damp areas.
Sources of damp should be eliminated before applying the paint.

How to apply ASAP:
STIR WELL BEFORE USE.
Do not thin the product.
Apply evenly by brush.Oone or two coats should be applied allowing 3-4 hours between coats in warm dry conditions.
Cold, damp conditions will significantly extend the drying times.
Do not apply outdoors when foggy or likely to rain before the paint has dried