Outdoor Clear Varnish Gloss
A quick-drying, durable, clear coating which gives a long lasting protection to all external wood and is touch dry in 30 minutes, re-coatable in 4 hours.
Intended Use:
Exterior joinery both hard & softwood, doors, windows, garden furniture, conservatories.
May also be used as a sealer for concrete.
Special Features:
Low odour, non-yellowing, resists cracking, peeling, blistering.
The varnish has very little effect on the colour of the timber that it is applied to.
Preparation:
Surfaces must be clean, dry and free of wax, grease and contaminants, smooth and sound.
Fill large cracks, open joints and damaged areas with a high quality flexible filler.
Wash oily woods, knots or resinous areas with white spirit.
Remove mould, lichens, algae & moss with brush, scraper & domestic bleach, then rinse thoroughly and allow to dry.
Application:
Using a synthetic brush, apply liberally with a full brush finishing with the grain.
The first coat may be diluted with water on hot days (up to 15%).
Do not apply to hot surfaces or in strong sunlight if possible or if rain is likely.
Coats Apply 3 coats and lightly sand after 1st coat if there is raising of the grain.
Drying Time:
Touch dry 30 minutes. (On hot days may be touch dry within 10 minutes).
Re-coating Time – 4 hours minimum, depending on temperature & humidity.
Application Temp – Ideally 15-25°C. Do not apply below 10°C, or in high humidity or if rain expected.
Coverage – 12-15sq.m per litre, 1 coat, depending on absorbency of surface.
Maintenance – Re-coat every 2 to 3 years. Clean with a mild detergent solution and lightly sand to provide key.
Compatibility – May be applied over old existing coating if these are in good condition and rubbed down to
provide a key.
Settlement – STIR WELL BEFORE USE.
Shelf-life/Storage – Many years if stored in original, tightly closed container in normal conditions. PROTECT FROM
FROST.
Clean-Up with water whilst brush is still wet.
English 
French