Rustins – High Heat Black Paint 250ml 500ml.
Solvent based, Silicone Alkyd High Heat Paint.
Intended Use:
The paint is only suitable for use on ferrous metals, such as wood burning stoves, barbeques, domestic and industrial stoves, furnace chimneys, grates and exhausts.
Special Features – A fast drying, protective and decorative paint suitable for temperatures of up to 600° C
Preparation:
The surface must be clean, dry and free from grease, dust rust and other contaminants.
Remove all rust with a scrapper.
Application:
Stir well before use until there is no sediment on the bottom of the tin.
Apply with a bristle paint brush.
The paint may be sprayed but may require dilution with Xylene Thinners.
Coats – Only one light coat should be applied.
If a heavy coat or more than one coat is applied it is possible that the paint will flake from the surface.
Drying Time – The surface will be touch dry within 15 minutes and can be handled in 1 hour in good
conditions.
The painted article if air dried will become fully cured once it has been heated up to between 200 – 220° C for approximately 20 minutes.
Re-coating Time – The paint should not be recoated.
Application Temp. – Ideally 15-25°C. Do not use below 10°C, or in conditions of high humidity.
Coverage – 15 sq metres/litre per coat depending type of application and surface.
Maintenance – The previous coat will need to be removed if recoating becomes necessary.
Settlement – Stir well before use.
Shelf-life/Storage:
The shelf life of the product is 2 years.
It is preferable to store the product in a cool place.
It is important to replace the lid and ensure an airtight seal after use.
NOTE: The product may be used after shelf life has expired but should first be checked to ensure that there is no deterioration
of quality.
We are available via WhatsApp – click here:
English 
French