Sandtex Retail – Microseal Smooth Masonry – 2.5L – White

Sandtex Retail – Microseal Smooth Masonry – 2.5L – White.

Sandtex Microseal Smooth Masonry Paint is microporous and provides sealing attributes that protect the coating against water ingress.

This means that the coating allows the surface to breathe and moisture to evaporate whilst at the same time protecting the coated surface from water penetration.

The advanced coating protects over an extended period against mould and algae growth.

Its dirt resistant properties also help to maintain the coating’s aesthetic features, and with the benefit of being rainproof in just 1 hour you can complete the job even if the weather forecast is not reliable.

With 15 years trusted durability, you can ensure that your house looks better for longer.

• 15 years trusted durability
• Breathable
• Resists peeling and flaking
• Dirt resistant
• Mould and algae resistant
• Rainproof in just 1 hour
• Smooth paint finish
• Covers 12 -16 sq metres per litre

SUITABLE SURFACES:

Suitable: For use on most sound, dry exterior surfaces including render, roughcast, pebbledash, concrete, building blocks, facing bricks and previously painted surfaces.
Not Suitable: On common, fletton or engineering type bricks.

PREPARATION:

General Preparation: All surfaces must be sound, clean, dry and free from anything that will interfere with the adhesion of the paint.
New surfaces usually require little preparation but must be completely dried out before painting.
Loose or Flaking Material: Remove all loose and flaking material by scraping or brushing with a stiff bristle brush (not wire).
Chalking, Weathered. Powdery or Porous Surfaces: These surfaces should be brushed down and treated with an application of Stabilising Solution.
As with all coatings preparation is key and poor preparation will result in poor coating performance.

APPLICATION:

General Application:
Stir well before and during use.
Apply with a good quality masonry brush, exterior roller or airless spray.
See spray manufacturer’s instructions for guidelines on application.
Do not apply if there is a risk of rain or frost, or if the temperature will fall below 8°C during drying.

Drying Time: Re-coatable after 3-4 hours in normal conditions.

Cleaning: Wash all equipment in clean water immediately after use.

 STORAGE:

Ensure this pack is stored upright and secure at all times. Do not store below 5°C or above 40°C.
Crown Paints is not liable for decorating costs caused as a result of an incorrect colour being
applied, damage caused by spillage or a failure to follow manufacturer’s instructions.